Clear epoxy resin crystal clear curing easy mixing at 1:1 by volume 1 gallon kit

Description

GENERAL USE EPOXY RESIN – INDUSTRIAL GRADE
Please Note: This kit is a one gallon total.  The resin weighs 4.2 pounds and the hardener weighs 4 pounds. Formulated to meet a variety of applications.  Specially designed with Low viscosity, convenient 1:1 mix ratio by volume, long pot life, room temperature curing system with great clarity and a high gloss finish.
This product cures very hard and exhibits good air release.  Excellent chemical and water resistance(s), coupled with superb mechanical properties, make this resin a candidate for all applications.
Perfect for tabletops, fiberglass work, small castings (under 1/2 inch), electrical potting, jewelry making, concrete – pebble coating, marine applications- boat building, & wood water proofing – repairs.
Typical Properties
:
Mix Ratio…………………………………1:1 by volume
Pot-Life …………………………………..45-50 minutes (100gram mass)
Hardness…………………………………D78
Mixed Viscosity……………………….1200cps.
Tensile Strength, psi………………..7,500
Compressive Strength, psi………15,400
Linear Shrinkage, in/in……………..0008
Chemical Resistance………………..excellent
Moisture Resistance…………………excellent
Dielectric Strength, (volt/mil)…….550
Dielectric Constant, 1mhz…………3.2
Product weight…………………………8 pounds
Cure Speed
This product provides fast cure and property development at ambient and low temperatures without accelerators and allows for quick return to service.  Typical pot-life on this item is roughly 45-50 minutes based on mass and temperature.  Thin film set time (3mil. film) is roughly 5 hours at 78F.  Fast cure and green time while exhibiting low exothermic temperatures (120C.) makes this product ideal for all applications.  Full cure is 24 hours at normal conditions.
This product cures to a brilliant high gloss finish.  The finished product will be very rigid, smooth, clear, and display a brilliant high gloss finish similar to glass.
Mixing, Storage, and Application
Mix this resin 1:1 by volume. When mixing this product, make sure to use a round cup & mix thoroughly scraping all sides and bottom of mixing container.  Improperly mixed epoxy can create a major headache.  Remember that thermoset plastics are temperature sensitive.  Cold weather slows the cure process down, whereas heat speeds curing up.  Always try to mix chemicals at room temperature.  For best results, try pouring epoxy into hardener.  Pour along the side of the container to help alleviate air entrapment.  Mix for at least 3-5 minutes in a in a round motion until chemical are clear and free of striations.  Allow the mixed components to stand in your mixed cup for at least 5 minutes.  This allows for bubbles to rise to the surface.  Small castings and potting units may take longer to cure than larger items.
This chemical needs to be stored in a dry, safe, temperature controlled environment.  Always keep the lids tightly sealed when not in use.  Remember, oxygen and moisture oxidize and can rapidly degrade the epoxy and hardener.  Moisture is also a potential issue.  Always keep the bottles sealed when not in use.
When applying this product, use gloves, goggles, and proper safety equipment.
SHIPPING
:
Our warehouse ships items within 1 business day.  We ship USPS and will forward all tracking information once your item has shipped.  Please be advised that our normal business hours are Monday to Friday.  USPS usually has 5 day transit if not in a rural area.  All together, it should take about 4-5 business days to arrive.
RETURNS:
Our goal is to provide quality products and keep our customers happy.  If you are not satisfied with your purchase, we will issue you a full refund. We do ask that the buyer pays for return shipping.